Wall Clock Repair Kit

If time is an agreement between people about the temporal juxtaposition of events, then a broken clock is surely a strain-if not a violation – of this agreement. Broken clocks, as broken agreements, are a sum of their parts and several pieces are available to repair a wall clock broken and you deliver at the time.


When a wall clock goes bad, repairs will be difficult and even harmful without the proper tools. Clocks and wall clocks vary from standard, inexpensive decorated quartz clocks, cuckoos by hand or coiled spring clocks. Each of these clocks has needs of different tools, but many tools are needed, no matter what kind of clock is on repair table. Clock repair tools must be small, and often a ceiling light is necessary to see the pieces in detail during the execution of repairs. In addition, a magnifier of at least 2 ½ power – either in the form of a glass looking for the tight table or a magnifying glass of the eye – is needed. Other tools include tongs for handling of small parts, screw driver jeweller size, files and small claws called mainspring C clamps to hold the spring during the execution of the work.

Replacement of the Interior

Often, repair a wall clock means the replacement of parts in the clock. Quartz wall clocks work on Crystal LED circuits and often need to be replaced in a single unit. In this case, the purchase of a new clock motor and circuit board is possible in a unit complete and closed. For the most expensive clocks that are mechanical gear or driven by spring, the spring is often the first place to check malfunction. spare gears are also available where a device has been damaged, and can be purchased depending on the model and engine number. If the wall clock is driven by a motor, replacement engines can also be purchased according to the model of the clock or the engine model number.

Replacement outside

During the renovation of a clock, may need external parts to be replaced due to wear, deformation or rupture. Available for replacement parts are often based on the model number of the clock and may include the second, minute and hour hands, the face of the clock, the glass outer envelope or even rim.


Repairs can often be avoided in keeping with a rigorous maintenance schedule. Maintenance for wall clocks may include parts cleaning, lubrication and rewinding.