Why Maintain Your Bike

Whichever way you use your bike, this is a leisure activity or a performance practice, your bike needs regular maintenance. Indeed, as any means of transport or sports equipment, bicycle maintained will have a life span much greater. Similarly, the parts that compose it have less risk of breaking what you two advantages: no need to pay to replace, less risk of injury. Regarding frequency, it is recommended to use a checking before every ride and clean with precision time to time. The more you practice regularly, the more you will need to maintain it at regular intervals.

Which products for the maintenance of your bike?

According to e Bike Lights, bicycle lights are necessary for a perfect bike maintenance. Think so sure you bring a bucket of water, rags, sponges and a brush. You will also need lubricating oil, a degreasing agent and a bike cleaner. An oilcan will also serve you. It is important not to use products that are not specific, such as dishwashing detergent, because you’re likely to damage the components. Finally, if you prefer to jetting, avoid the high pressure which can severely damage the paint.

The frame and wheels

Start by cleaning the spine of your bike: the frame. With a sponge and cleaner, thoroughly clean all parts of the frame and the fork and all the items that will not be damaged by water as the seat, if it is not fabric.For wheels, first check that they are not already damaged, then check the pressure and finally clean the rims with a sponge. After rinsing, comes the drying stage, the most important: it is in fact quite dry to prevent rust on a component. For this, take a dry cloth and rub hard! Feel free to use a small air compressor if you have any.

The brakes and transmission

To clean the drive, you will first degrease the chain through the degreaser that you spray on the tape passing all speeds, so that the chain is well degreased in full. After fat, you need to lubricate: thus the chain can slide smoothly. For this, use the lubricant in the same way you fat. Finally, use a cloth to mop up the possible excess oil. On the brakes, regularly check them for wear for added security. Feel free to lubricate, very slightly, however careful not to wet the making.

Where to store your bike?

To prevent damage to your bike, it is best to store it in a dry place, away from moisture that can damage components.

The advice of the coach

If you have some time, you can also check the screws on your bike: we rarely think about it, but a loose screw can be dangerous when driving.